Posts Tagged ‘power meter


It is time to get to know how we can read the power rating of an electrical appliance and how we can use this information in order to calculate a rough estimate on what should be the expected energy usage. Depending on the device and how it operates the actual energy usage it will have may vary, but using the power rating we should at least be able to get a good estimate on the maximum expected energy usage. The best way to learn what is the actual energy usage over a period of time is to use a power meter and/or electricity meter that will measure it accurately. So let us start with an example, on the photo above you can see the label of a power supply of an HP laptop. What we need to look at are the numbers in the lower left corner of the label as these are the power ratings.

The 200W means that the power supply of the laptop has a power rating of 200W, but this is actually the maximum power that the PSU is capable of providing, meaning that the laptop it is connected to will not be actually consuming 200W of power. We can use the number 200 however to calculate the maximum energy usage of the laptop if it is really maxing up what the power supply is capable of providing. So if the laptop runs for 1 hour with a 200W power usage it will have used 0.2 kWh (200 Wh) of energy that we need to pay for, but in reality that number should be lower. Now, if you don’t see a direct number in Watts written on the label of the power supply, but just the Input and Output numbers you should still be able to do the math yourself.

What we are interested in is the Output voltage as the power supply takes the higher Alternating Current (AC) voltage from the electrical network and produces lower Direct Current (DC) that is being used by the laptop. Since the power supply for the laptop is with wide range input (100-240V) to make it compatible with different voltages used worldwide the input values are not going to do us much good. The output of the power supply however is going to work just fine if we take the 19.5 Volt output with 10.3 Ampere, so if we multiply 19.5 * 10.3 we are going to get 200.85 Watts – this is in fact our 200W power rating.


We are using the specific HP laptop as an example, because it has a built-in power meter that will report the real-time energy consumption of the computer based on the current load it is experiencing. You can see that although the power rating of the laptop’s power supply was 200W it normal usage scenario we are using just about 1/4 of that or 53 Watts according to the HP Power Assistant software that measures the current real-time power usage. So if that power usage of 53W remains the same for one hour of us using the laptop we would have just 0.053 kWh of energy consumed as opposed to 0.2 kWh we calculated taking only the power rating of the computer’s power supply. However if we have used a light bulb rated at 100W (pretty bright one) we can accurately use the power rating of 100W of the light bulb to calculate its energy use over a period of time as it maxes out its power rating when turned on and produces light. So things can vary when we have different electrical appliances available, depending on how they actually work and what they do.

There is one more thing when we have electronic devices that use power supply to convert higher voltage AC from the electricity network to lower voltage DC energy that is needed by our computer to function. The conversion that is happening can be made with varying efficiency, meaning that some extra energy is being lost during the conversion in the form of heat and as a result you may notice that the power supply of the laptop starts to get hotter after some usage. The higher the efficiency, the lower the loss of extra power in the form of heat, anything over 80% efficiency is generally considered good and the most efficient solutions can go over 90%. So if we attache a power/energy meter between the power supply and the electricity network where we would normally connect it we can measure the actual power usage. With 53W reported by the laptop that are being used after the conversion, if the power supply has an efficiency of let us say 85% the actual power usage will end up being 60.95W. That is precisely why we need to use a power meter to actually get a right reading on the actual power being used by a device and not rely only on the power rating on its label or some specifications.


The electricity meter, electric meter, or energy meter is a device that measures the total amount of electric energy consumed by a household, so everyone has one since this is the device that electric utilities use to calculate your monthly electric bill. The electricity meter measures the total energy that all electronic devices in your home uses in kilowatt hour (kWh), and when the value reported is checked every month you get a bill for the energy used in that period of time. By checking the values reported by the electricity meter or just checking your monthly bill you should be able to get an idea on the total electric energy consumption of your home, but it will not give you an idea on what different devices use and possibly how to optimize the power usage to lower your electric bill. Sometimes you just want to know when a device is turned off if it continues to use some small amounts of electric energy or not and should you actually unplug it from the power outlet if you are not going to be using it for a while.


You can get a rough estimation on how much power might each electronic device use by checking the label on it that has the power usage specifications listed (could be on the device itself or on an external power adapter if used). But this is only an estimate as value listed on the device usually refers to the maximum power usage and not the average or the typical one, so this may not be as accurate as you might want. This is where a power meter can come in handy as it will be able to show you the exact amount of power used by a device and also most likely the total power used for a period of time. Thing of a power meter like a miniature version of the electricity meter, but the power meter you connect between the power consumer (the electronic device you need to measure) and the source of electricity such as your power socket. But there are power meters used with portable sources of electricity such as batteries when you want to measure for example the power consumption of a mobile device. So there are various different kinds of power meters that can help you what different devices you are using are actually consuming in therms of electric energy and we are going to going into more detail about these soon.